Bridge Lighting Decoration Attentions
City Night Lighting Factory stated that due to the large number of lamps used in bridge lighting projects, the following items should be paid attention to in the design of bridge lighting projects:
1. Determine the location of the lamps. The bridge lighting project is a new lighting construction lighting project after the bridge has been constructed, so the main purpose is to highlight the bridge shape and beautify the city night scene.
What do lantern lighting manufacturers think that bridge lantern lighting engineering design should pay attention to?
2. The placement of lighting fixtures directly affects the actual effect of bridge lighting and the difficulty of maintenance and management. There are too many lamps on both sides of the bridge, and the lighting radiation and projection effects are not obvious. In addition, if the lighting position is too high, the lighting will be easily damaged from the outside, and the safety hazard and operation and maintenance cost will increase; if the lighting installation position is too low, the construction operation and future maintenance will be difficult, the bridge will be greatly affected by lighting, and the farsightedness effect will be poor.
3. When erecting bridges and conduits on bridges, attention must be paid to the damage and impact on existing bridge structures during the installation of bridges and conduit supports. Therefore, the waste holes in the construction process and the bracket installation process should be blocked with epoxy mortar in time to reduce the damage to the structure.
4. The lamps and equipment installed in the bridge lighting project are different from the working environment of ordinary lighting lamps, and most of them work in the open air. During the installation of bridge lighting fixtures and equipment, it is necessary to do a good job of anti-aging and rain-proof of the lighting and equipment lines.
5. According to the lighting manufacturers for cultural tourism at night, the bridge lighting project is a new lighting project outside the existing structure. The new additions are all surface-mounted, and some of the ramps have a small amount of concrete, which is vulnerable to external man-made damage and influence.
